Intuitive touch screen operation.
Hot runner system eliminates runner and improve productivity.
Separate 7 liter melting tank(s). Multiple meltingtank is optional.
LPMS specially designed melt-on-demand tank can melt down the resin swiftly and evenly.
The gear pump is made of hard-wearing material，which is stable，injection volume accuracy ±0.1g，maximum shot size is 5.8g/s.
Injection pressure range 1~50kg, which can be controlled by the pneumatic safety valve. LPMS also have option like electronic safety valve, which means the injection pressure can be set more precisely from the PLC.
Light curtain and dual palm buttons for operator safety.
LPMS® machines are engineered for low pressure molding, using specialty resins to encapsulate delicate parts, like automotive electronics, PCBA, coil, fiber-optic, LED lighting, cable, etc.
Hot runner system eliminates runners and higher output per cycle. It is designed for high volume production.
Machine Size / Weight
1400 mm x800 mm x 1920 mm / 600 kg
55.12 in x 31.50 in x 75.59 in / 1323 lbs
1400 mm x 1700mm | 55.12 in x 66.93 in
Working Station Height
905 mm | 35.63 mm
Packing Size / Weight
1470 mm x 960 mm x 2140 mm / 640 kg
57.87 in x 37.80 in x 84.25 in / 1411 lbs
Melt on demand 7 liter x 1
Auto Feeding System
Gun Model & Tip
Hot Runner System
1.6 m x 2
200-240VAC / 1 Phase / 50 Hz
Temperature Control Zones
11 or 15，depends on part design
Each Station Gun Tip Q'ty
2 or 4 , depends on part design
Ambient up to 250°C / 485°F
Min. Air Pressure
0.5 MPa | 73 Psi
0.18 m3 / min | 6.3ft3 / min
Air Over Oil Cylinder
Max.5 Tons ( Option 10 Tons )
150 mm | 5.9 in
7 ”HMI , PLC controlled
Light Curtain , emergency stop button
Mold Set Size
250 mm x 150 mm x 308mm / 75 kg
9.84 in x 5.91 in x12.13 in / 165 lbs
Max . Mold Set Size
300 mm x 200 mm x 308 mm
11.81 in x7.87 in x12.13 in
Max . Part Size
100 mm x 90 mm x 18 mm
3.94 in x 3.54 in x 0.71 in