Dual independentworking stations.
Separate 7 liter melting tank. Multiple meltingtank is optional.
LPMS specially designed melt-on-demand tank can melt down the resin swiftly and evenly.
The gear pump is made of hard-wearing material，which is stable，injection volume accuracy ±0.1g，maximum shot size is 5.8g/s.
Injection pressure range 1~50kg, which can be controlled by the pneumatic safety valve. LPMS also have option like electronic safety valve, which means the injection pressure can be set more precisely from the PLC.
Five thermal control zones for precise melt control.
LPMS® machines are engineered for low pressure molding, using specialty resins to encapsulate delicate parts, like automotive electronics, PCBA, coil, fiber-optic, LED lighting, cable, etc.
The benefit of vertical injection is that when smaller parts allow the cavity to be split into two or four cavities. This allows shorter runners and higher output per cycle. It’s suitable for multiple cavity mold for cable, wire harness, LED, etc.
Machine Size / Weight
1300 mm x 780 mm x 1670 mm / 540 kg
51.18 in x 30.71 in x 65.75 in / 1190 lbs
1300 mm x 1700 mm | 51.18 in x 66.93 in
Working Station Height
850 mm | 33.46 in
Packing Size / Weight
1370 mm x 910 mm x1750 mm / 580 kg
53.94 in x 35.83 in x 68.90 in / 1279 lbs
Melting Tank 
Melt on demand 7 literx 1
Auto Feeding System
Gun Model & Tip
LPMS-G08 x2 / 36.4°
1.6 mx 2
200-240VAC/1 Phase/50 Hz
Temperature Control Zones
Ambient up to 250°C / 485°F
Min. Air Pressure
0.5MPa | 73 Psi
0.18 m3 / min | 6.3ft3 / min
150 mm | 5.91 in
7 ”HMI , PLC controlled
Light curtain, emergency stop button
Std. Mold Set Size
230 mm x120 mm x150 mm / 25 kg
9.06 in x4.72 in x5.91 in / 55.12 lbs
Max . Mold Set Size
300 mm x 200 mm x150 mm
11.81 in x7.87 in x 5.90 in