PA hotmelt low pressure molding
Vertical Injection
Hot Runner with Separate Tank

DELTA 2000

Hot Runner with Separate Tank

  •  Intuitive touch screen operation.

  •  Dual independent working stations for large production runs.

  •  Hot runner system eliminates runner and improve productivity.

  •  Separate 7 liter melting tank(s). Multiple melting tank is optional.

  •  LPMS specially designed melt-on-demand tank can melt down the resin swiftly and evenly.

  •  The gear pump is made of hard-wearing materialwhich is stableinjection volume accuracy ±0.1gmaximum shot size is 5.8g/s.

  •  Injection pressure range 1~50kg, which can be controlled by the pneumatic safety valve. LPMS also have option like electronic safety valve, which means the injection pressure can be set more precisely        from the PLC.

  •  Fifteen thermal control zones for precise melt control.

  •  Light curtain and dual palm buttons for operator safety.

  •  Ejection system.


LPMS® machines are engineered for low pressure molding, using specialty resins to encapsulate delicate parts, like automotive electronics, PCBA, coil, fiber-optic, LED lighting, cable, etc.

Hot runner system eliminates runners and higher output per cycle. It is designed for high volume production.


Machine Size

1300 mm x 800 mm x 1740 mm / 520 kg

51.18 in x 31.50 in x 68.50 in / 1146 lbs

Working Station Height

840 mm  |  33.07 in

Plant View

1300 mm x 1700 mm  |  51.18 in x 66.93 in

Packing Size

1370 mm x 930 mm x 1830 mm / 560 kg

53.94 in x 36.61 in x 72.05 in / 1235 lbs

Melting Tank 

Melt on demand 7 liter x 1

Auto Feeding System


Gun Model & Tip Angle

Hot Runner System

Heated Hose 

1.6 m x 2


200-240 VAC / 1 Phase / 50 Hz

Temperature Control Zones

11 or 15,depends on part design

Each Station Gun Tip Qty

2 or 4depends on part design

Temperature Range 

Ambient up to 250°C / 485°F

Max. Power

8Kw or 9.5Kw depends on gun tip qty

Min. Air Pressure

0.5 MPa  |  73 Psi

Air Consumption

0.18 m3 / min  |  6.35 ft³ / min

Clamping Device

Air Cylinder

Clamping Force

Max.1.2 Tons

Clamping Stroke 

150 mm  |  5.91 in

Control System

7 ”HMI , PLC controlled

Safety Protection

Light Curtain , emergency stop button

Standard Mold Set Size 

250 mm x 150 mm x 308 mm / 75 kg

9.84 in x 5.91 in x12.13 in / 165 lbs

Max. Mold Set Size

300 mm x 200 mm x 308 mm  

11.81 in x 7.87 in x 12.13 in

Max. Part Size

60 mm x 50 mm x 18 mm  |  2.36 in x1.97 in x 0.71 in