Intuitive touch screen operation.
3 liter melting tank integrated into machine.
The gear pump is made of hard-wearing material，which is stable，injection volume accuracy ±0.1g，maximum shot size is 5g/s.
Injection pressure range 1~50kg, which can be controlled by the pneumatic safety valve. LPMS also have option like electronic safety valve, which means the injection pressure can be set more precisely from the PLC.
Over temperature alarm and automatic heating stop functions.
Two temperature control zone work independently.
Light curtain and photoelectricity to protect workers during the operation.
LPMS® machines are engineered for low pressure molding, using specialty resins to encapsulate delicate parts, like automotive electronics, PCBA, coil, fiber-optic, LED lighting, cable, etc.
The benefit of side injection is that when one large cavity being encapsulated from the center of the mold, which can prevent the gate mark from the center of product.
Machine Size / Weight
800 mm x 830 mm x 1650 mm / 320 kg
31.50 in x 32.68 in x 64.96 in / 705 lbs
800 mm x 830mm / 31.50 in x 32.68 in
Working Station Height
850 mm | 33.46 in
Packing Size / Weight
1060 mm x 1020 mm x 1750 mm / 355 kg
41.73 in x 40.16 in x 68.90 in /782 lbs
Melting Tank Model & Q'ty
MT-03-600 x 1
Auto Feeding System
Maximum shot size
5.8 g / RPM
Gun Model & Tip
LPMS-G02 x 1 / 36.4° or 90°
Heated Hose Model & Q'ty
200-240VAC / 1 Phase / 50 Hz
Temperature Control Zones
Ambient up to 250°C / 485°F
Min. Air Pressure
0.5 MPa | 73 Psi
0.1m3 / min | 3.5ft3 / min
Std. 0.75 Ton (Option1.2 Tons)
Std.125 mm (Option 150 mm)
Std.4.92 in (Option 5.91 in)
7 ”HMI , PLC controlled
Light Curtain, Side Safety doors ,Protective Cover
Mold Set Size
180 mm x 100 mm x 150 mm /16 kg
7.09 in x 3.94 in x 5.91 in /35.27 lbs
Max . Mold Set Size
250 mm x 120 mm x 150 mm
9.84 in x 4.72 in x 5.91 in
Max . Part Size
50 mm x 45 mm x 7 mm
1.97 in x 1.77 in x 0.28 in