PA hotmelt low pressure molding
Side Injection
Side Injection Shuttle TableCompact Machine


Side Injection Shuttle TableCompact Machine

l  Shuttle table design,one upper mold serves two bottom molds, which increases throughput and is safe for workers.

l  7 liter melting tank integrated into machine without hose.

l  LPMS specially designed melt-on-demand tank can melt down the resin swiftly and evenly.

l  Injection pressure range 1~50kg, which can be controlled by the pneumatic safety valve. LPMS also have option like electronic safety valve, which means the injection pressure can be set more precisely from the PLC.

l  The gear pump is made of hard-wearing material,which is stable, maximum shot size is 5.8 g/s.

l  Modular injection system for ease of service.

l  Two temperature control zone work independently.

l  Over temperature alarm, automatic heating, stop heatingfunctions are included.

l  Light curtain and photo-electricity sensor buttons protect workers during the operation.

l  Mold is easy to install due to LPMS’standard mold base.

l  Ejection system is equipped.

l  Optional : Dual dispensing control system.

l  Optional : Auto-feeding system and dryer machineenhance productivity.



 LPMS®  machines are engineered for low pressure molding, using specialty resins to encapsulate delicate parts, like automotive electronics, PCBA, coil, fiber-optic, LED lighting, cable, etc.

  The benefits of side injection is that when one large cavity being encapsulated from the center of the mold, which can prevent the gate mark from the center of product.


Machine Size / Weight

990 mm x 874 mm x 965 mm / 400 kg

38.98 in x 34.41 in x 37.99 in / 881 lbs


990 mm x 874 mm  |  38.98 in x 34.41 in

Working Station Height      


Packing Size / Weight  

1100mm x 960 mmx 1165 mm / 470kg

43.31in x 37.80 in x 45.87 in / 661 lbs

Melting Tank

7 Liter x1

Shot size (only for reference)

5.8g / RPM

Gun Model & Tip

LPMS-G02 / 36.4°or 90°

Heated Hose



200-240VAC / 1 Phase / 50 Hz

Temperature Control Zones 


Temperature Range

Ambient up to 250°C / 485°F

Max .Power


Min. Air Pressure  

0.5MPa  |  73 Psi

Air Consumption   

0.1m3 / min  |  3.5ft3 / min


Air Cylinder

Clamping Force    

Max.2.0 Ton  (Air pressure 0.65MPa)

Clamping Stroke   

75 mm 

Ejector Force

Air Cylinder

Ejector Stroke      

980 N

PControl System   

7”HMI , PLC controlled

Safety Protection  

Light curtain and photo-electricity sensor buttons

)Mold Set Size      

180 mm x 100 mm x 150 mm /16 kg

7.09 in x 3.94 in x 5.91 in /35.27 lbs

Max. Mold Set Size      

250 mm x 120 mm x 150 mm

9.84 inx 4.72 in x 5.91 in