PA hotmelt low pressure molding
Vertical Injection Hot Runner with Separate Tank


Vertical Injection Hot Runner with Separate Tank

Hot runner system eliminates runner resin and improve productivity.

Air over oil cylinder gives larger clamp force for bigger part.

Separate high volume melting tank.

7 "in touch screen operator interface with multi-language PLC.

Four post die set for larger parts.

Equipped with light curtain and dual palm buttons for operator safety.

Ejection system is equipped.


       Our machines are engineered for low pressure molding applications. Using specialty resins to encapsulate delicate parts.

  Applications including : automotive electronics, PCBA,coil, fiber-optic, LED lighting, wire, cable, etc.


Machine Size / Weight

2205 mm x 2240 mm x 3050 mm


2205 mm x 2240 mm  

Working Station Height

1070 mm

Melting Tank Model & Q'ty 1

LPMS 500B-30x 3  

Auto Feeding System


Gun Model & Tip


Each Station Gun Tip Qty

8depends on part design

Heated Hose Model & Q'ty 2

LPMS-H16J x 1

Electricity 3

200-240VAC/1 Phase/ 50Hz

Temperature Control Zones

18 according to the part  

Temperature Range 4

Ambient up to 446°F

Max .Power

25 Kw

Min. Air Pressure

0.5MPa  |  73 Psi

Air Consumption

0.1 m3/min  |  3.5 ft3/min

Clamping Force

Max.150 Tons

Clamping Stroke

150 mm  |  5.9 in  

Control System

PLC+7 in HMI

Safety Protection

Light Curtain

Max . Part Size

600 mm x 600 mm x 30 mm

23.62 in x 23.62 in x 1.18 in




Machine dimension


Mold set dimension